• 10 milioni di componenti
  • Spedizione in giornata per 30.000 articoli
  • Prezzi competitivi

I nostri uffici sono aperti lun.- giov. 8:00 - 17:00, ven. 8:00-16:00 (GMT+2)

Ricerca per categoria
o fornitore

Ricerca per categoria
Componenti meccanici
Viti, bulloni, rondelle, dadi
Materiali industriali
Materiale elettrico
Controlli e parti per PC
Utensili da taglio
Materiali industriali
Materiali per imballaggio
Materiale sanitario, per uffici, per antinfortunistica
Materiali per R&D e camera bianca
Componenti per stampi deformazione lamiera
Componenti per stampi iniezione plastica

Ricerca per fornitore
Lista fornitori

Punte a tagliare per lavorazione legno

  • Numero di dati da visualizzare
    30
    45
    60
  • Ordina
Giorni spedizione
  • Tutti gli articoli
  • 3 giorni o meno
  • 4 giorni o meno
  • 5 giorni o meno
  • 6 giorni o meno
  • 7 giorni o meno
  • 8 giorni o meno
  • 9 giorni o meno
  • Woodworking Bit Carbide Straight Bit

    Woodworking Bit Carbide Straight Bit

    DAINISHO

    [Features] Pointed edge tool for hole drilling, grooving, cutting out, and stair ruling. For hole drilling, grooving, and cutting out, etc. (wood working and bottom surface are beautifully finished using a high-speed cutting tool). Successful as a pointed edged tool for each manufacturer's stair ruling. An ideal 6 × 8 × 35 hinge bit for machining hinge excavation in one operation.

    • Sconto volumi elevati
    A partire da
    22.44€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Short Bit for Woodworking

    Short Bit for Woodworking

    TRAD

    Spiral drill edge assures good bite into workpiece and accelerates drilling. Produce clear finish surfaces of the workpiece.

    • Sconto volumi elevati
    A partire da
    5.64€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Hole Saw for Woodworking

    Hole Saw for Woodworking

    MITSUTOMO

    Ideal for drilling into veneer, plywood and wood. For rotation use.

    A partire da
    5.04€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Short Bit

    Short Bit

    STAR-M

    For Shallow Penetration Drilling

    A partire da
    7.94€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Circle Cutter

    Circle Cutter

    TRUSCO NAKAYAMA

    [Characteristics] Can be used on a wide range of materials, from wood to sheet iron. For drilling large holes using electric drills or drill presses. [Use] Work material: thin sheet iron (up to 1.5 mm), plywood, plastic, aluminum sheet (up to 1.2 mm), brass plates, acrylics (up to 6.3 mm).

    A partire da
    35.96€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Wave Cutter

    Wave Cutter

    STAR-M

    For drilling work of wood and bamboo

    A partire da
    21.54€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Carbide Adjustable Circle Cutter

    Carbide Adjustable Circle Cutter

    STAR-M

    Drilling for down light, pipe, duct, and the like.

    A partire da
    9.23€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Woodworking Bit Straight Trimmer

    Woodworking Bit Straight Trimmer

    DAINISHO

    [Features] Bottom leveling / wiping joints.

    • Sconto volumi elevati
    A partire da
    30.74€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Carbide Counterboring Cutter

    Carbide Counterboring Cutter

    DAINISHO

    [Features] Cutter for spot facing / counter boring / groove cutting. For sliding hinges, for example, and handles for fusuma (Japanese sliding panels). A bottom-edge type of carbide blade has been adopted to prevent recoil due to the light sharpness and biting-in. We can guarantee you smoother operation and a longer tool life. Ideal for countersinking such as sliding hinges and handles for fusuma sliding doors, etc.

    • Sconto volumi elevati
    A partire da
    65.62€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • SDS Bit for Woodworking

    SDS Bit for Woodworking

    ONISHI MANUFACTURING

    Lightweight hammer drill can be used as a woodworking drill at a touch of a button (rotation mode only).

    • Sconto volumi elevati
    A partire da
    10.89€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Router Bit, Straight Bit with Guide Bearing

    Router Bit, Straight Bit with Guide Bearing

    DAINISHO

    [Features] Both round and square holes can be handled with this one tool.

    • Sconto volumi elevati
    A partire da
    29.00€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Bamboo Drill

    Bamboo Drill

    STAR-M

    For drilling holes in bamboo, lumber, and acryllic.

    A partire da
    10.16€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Router Bit, Bose Surfaces

    Router Bit, Bose Surfaces

    DAINISHO

    A lightweight rigid plastic board made of a three-layered structure that traps air in the middle. [Features] For decorative surfaces / chamfering / joining.

    • Sconto volumi elevati
    A partire da
    51.94€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • High Speed Hexagonal Shaft Chamfering Cutters 90°

    High Speed Hexagonal Shaft Chamfering Cutters 90°

    STAR-M

    For Deburring and Chamfering After Hole Drilling

    A partire da
    9.49€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Combined-Use Bit for Woodworking

    Combined-Use Bit for Woodworking

    TRAD

    Spiral drill edge assures good bite into workpiece and accelerates drilling. Produce clear finish surfaces of the workpiece.

    • Sconto volumi elevati
    A partire da
    6.41€
    Consegna da
    3 giorni

    *Prezzo unitario in configurazione base

  • Woodworking Circle Cutter

    Woodworking Circle Cutter [1-2 Pezzi per confezione]

    MITSUTOMO

    [Characteristics] Ideal for drilling holes in wood and gypsum board. For drilling holes using electric drills or drill presses. [Application] Work material: wood / gypsum board / vinyl chloride / plastic.

    A partire da
    8.30€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Hexagonal Dowel Cone / Wood Dowel

    Hexagonal Dowel Cone / Wood Dowel

    ONISHI MANUFACTURING

    [Characteristics] Drill specialized for slit hole opening. Comes with a stopper that allows hole opening to a certain depth to be performed. 6.35 hexagonal shaft that can be used with impact drills. This drill has the required effective length to open slit holes in wood. Comes with a stopper that allows hole opening to a certain depth. [Application] Work Material: Wood.

    • Sconto volumi elevati
    A partire da
    3.84€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Woodworking Bit Ten-By-Router

    Woodworking Bit Ten-By-Router

    DAINISHO

    Resale long-lasting ultra-fine carbide tips

    • Sconto volumi elevati
    A partire da
    30.98€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Woodworking Bit Easy Nick Bit

    Woodworking Bit Easy Nick Bit

    DAINISHO

    With one-sided nickel blade cuts in two with a single stroke wood board and thick plywood (Rough cutting type)

    A partire da
    30.98€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Router Bit, Polishing for Joints

    Router Bit, Polishing for Joints

    DAINISHO

    [Features] Cuts out the board stuck on top into the same shape as the foundation.

    • Sconto volumi elevati
    A partire da
    29.71€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Drill for SDS Iron Processing

    Drill for SDS Iron Processing

    ONISHI MANUFACTURING

    Lightweight hammer drill can be used as an iron drill at a touch of a button (rotation mode only). Stainless steel machining is supported

    • Sconto volumi elevati
    A partire da
    14.38€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Laminated Wood Drill

    Laminated Wood Drill

    STAR-M

    Drilling of hardwood, laminated materials and synthetic sleepers

    A partire da
    70.03€
    Consegna da
    6 giorni

    *Prezzo unitario in configurazione base

  • Combined-Use Bit

    Combined-Use Bit

    ONISHI MANUFACTURING

    [Characteristics] Ideal for drilling holes in supports. Can perform drilling with impact drivers up to φ21 mm. [Application] Work Material: Wood. For through holes on wood materials.

    • Sconto volumi elevati
    A partire da
    8.46€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Bearings for corner bits

    Bearings for corner bits

    DAINISHO

    [Features] Bearing for corner bit part.

    • Sconto volumi elevati
    A partire da
    6.98€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Woodworking Bit Carbide Dovetail Groove

    Woodworking Bit Carbide Dovetail Groove

    DAINISHO

    A single piece can perform both male and female finish machining.

    • Sconto volumi elevati
    A partire da
    31.54€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Short Bit

    Short Bit

    ONISHI MANUFACTURING

    [Characteristics] Ideal for opening holes in sheets or boards. Can be used to perform hole opening with impact drivers up to φ21 mm in size. 2 ball grooves have been provided to the hexagonal shaft (6.35 mm) section, making it possible for use with both manual handles and impact drivers. [Application] Work Material: Wood. For through holes on wood materials.

    • Sconto volumi elevati
    A partire da
    7.70€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Long Drills Total Length 500

    Long Drills Total Length 500

    ONISHI MANUFACTURING

    [Characteristics] For through hole on wood materials. A tool for drilling deep holes in wooden materials. [Application] Work Material: Wood.

    A partire da
    17.79€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Triple Cutters

    Triple Cutters

    STAR-M

    For drilling in a wide variety of materials

    A partire da
    14.35€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Drill Bit

    Drill Bit

    STAR-M

    For Deep Penetration Holes

    A partire da
    12.95€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • One-Touch Gimlets

    One-Touch Gimlets [1-2 Pezzi per confezione]

    STAR-M

    Drilling for down light, pipe, duct, and the like.

    A partire da
    5.80€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Adjustable Circle Cutter for Charging Drill

    Adjustable Circle Cutter for Charging Drill

    STAR-M

    Drilling for down light, pipe, duct, and the like.

    A partire da
    6.37€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Adjustable Grooving Cutter 255E

    Adjustable Grooving Cutter 255E

    DAINISHO

    - AJ255EC: For medium-speed rotation, cutting width 3 - 27 mm, both sides polished. Almost no bottom curving.

    A partire da
    332.42€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Carbide V Type Bolt Filling Bit

    Carbide V Type Bolt Filling Bit

    STAR-M

    For counterboring screw washers

    A partire da
    85.90€
    Consegna da
    8 giorni

    *Prezzo unitario in configurazione base

  • Router Bit, Grooved Surface

    Router Bit, Grooved Surface

    DAINISHO

    [Features] An edged tool for decorative surfaces / surface chamfering of wood-based and resin-based materials (artificial marble).

    • Sconto volumi elevati
    A partire da
    49.63€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Adjustable Grooving Cutter 205DX

    Adjustable Grooving Cutter 205DX

    DAINISHO

    · AJ205DX: For high-speed rotation / 2.8 - 23 mm cutting width, polished on both sides. 18 mm wide for a flat base. [Features] For grooving and gouging out, etc. Machining can be done freely by turning the dial. The groove width can be freely adjusted by simply turning the dial, which means that several different cutters do not have to be prepared beforehand. Because there is a large number of blades, poly plywood and veneer give off minimal fluff.

    A partire da
    230.58€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Router Bit, Stepped Cove Surface

    Router Bit, Stepped Cove Surface

    DAINISHO

    [Features] An edged tool for decorative surfaces / surface chamfering of wood-based and resin-based materials (artificial marble).

    • Sconto volumi elevati
    A partire da
    53.46€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Router Bit, Male Grafting Bit

    Router Bit, Male Grafting Bit

    DAINISHO

    On Male Machining of Wooden Flooring

    • Sconto volumi elevati
    A partire da
    98.72€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Woodworking Bit Solid Carbide Straight Bit

    Woodworking Bit Solid Carbide Straight Bit

    DAINISHO

    [Features] Made of solid carbide, it is difficult to break. Because it is made of solid carbide, the carbide straight bit in this type provides a higher rigidity and it is difficult to break. Ideal for fine grooving and cutting out.

    • Sconto volumi elevati
    A partire da
    30.41€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Woodworking Bit V Groove Bit

    Woodworking Bit V Groove Bit

    DAINISHO

    For Lettering / Decorative Engraving

    A partire da
    60.00€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Woodworking Bit U Groove Bit

    Woodworking Bit U Groove Bit

    DAINISHO

    For Door Pull Handle Groove and Stair Cleat

    • Sconto volumi elevati
    A partire da
    46.43€
    Consegna da
    4 giorni

    *Prezzo unitario in configurazione base

  • Woodworking Bit Carbide 1 Step (Single-Sided) Flash Bit

    Woodworking Bit Carbide 1 Step (Single-Sided) Flash Bit

    DAINISHO

    [Features] For cutting out of single-sided veneer and boards, etc. In the case of thin core material, the narrow 6 x 6 x G5 guide (G) is used.

    • Sconto volumi elevati
    A partire da
    30.99€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Guide Rod for Counterboring Cutter / Gimlet

    Guide Rod for Counterboring Cutter / Gimlet

    DAINISHO

    [Features] Can be used for both a safe counterboring cutter, and a counterboring cutter with gimlet accessory. With pilot holes drilled by braces or gimlets, please be sure to use the same sized guide bar. It is dangerous to work with 5" guide bars in 6" pilot holes. For vertical counterboring of battledore bolts, etc., mounting a gimlet to the counterbore body allows the tap hole and counterbore to be machined simultaneously.

    • Sconto volumi elevati
    A partire da
    12.83€
    Consegna da
    Preventivo

    *Prezzo unitario in configurazione base

  • Hex Axis Under Hole Drill

    Hex Axis Under Hole Drill [1-3 Pezzi per confezione]

    STAR-M

    Screw tightening, prevents cracking of wood in pre-drilling holes prior to nailing.

    A partire da
    7.80€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Router Bit, Dovetail Drill Bit

    Router Bit, Dovetail Drill Bit

    DAINISHO

    Joined without using nails

    A partire da
    47.88€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

  • Router Bit, Horizontal Groove Bit

    Router Bit, Horizontal Groove Bit

    DAINISHO

    [Features] Internal machining of window frames and flooring. Ideally suited to grooving glass and board in sliding door fittings / furniture, etc. Grooving of the radial portion of arches, etc. can also be performed with ease using the bearing as a guide. For a wider desired groove width (when replacing glass or veneer, etc. with thick material, etc.), grooving can be done with the frame already in place. In combination with a grafting male bit, internal machining of flooring can also be carried out (4.5 × 6.5 or 6 × 8).

    • Sconto volumi elevati
    A partire da
    52.90€
    Consegna da
    5 giorni

    *Prezzo unitario in configurazione base

Configura

Ripristina

Limitare la ricerca specificando il produttore

Marchio

Limitare la ricerca specificando Tipo dati CAD

  • 2D
  • 3D

Selezione immagine

Attenzione: Prodotti di terzi (ovvero non di MISUMI) con un tempo di consegna pari o inferiore a 4gg. lavorativi possono essere cancellati entro 2 ore dal momento in cui è stato effettuato l´ordine. Per ulteriori informazioni in merito, consultare le nostre Condizioni Generali di Vendita (CGV) o i nostril termini di cancellazione.